#Fx-Pcs-Win-E Software Drivers Should Be

Fx-Pcs-Win-E Software Drivers Should Be

The largest communications distance is two kilometers.Do choose the USB-SC09 programming cable, for all FX series Mitsubishi PLC (including the old products FX2/FX2C).в—Џ Support USB-SC09-FX programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 and above.в—Џ Fully compatible with USB V1.1 norms and USB CDC V1.1в—Џ USB-bus powered, with current consumption of 50 mAв—Џ Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rateв—Џ Support UART data format: data bits: 7-8 stop bit: 1, 2 check-bit: odd / even / no parityв—Џ Support long-distance communications, the largest communications is two kilometers (9600 bps)в—Џ Each PC only supports one USB cable programmingUSB device drivers should be installed before using USB-SC09-FX programming cable.After completing Driver installation, the corresponding COM port for the USB-SC09-FX programming cable will be displayed in the вЂњDevice ManagerвЂќ of Window. The two-color LED on the converter box indicates dataвЂ™s transceiving status.USB-SC09-FX is applicable to the FX series PLC which has the MD8F radio socket of Mitsubishi, such as FX2N/FX1N/FX0/FX0N/FX0S/FX1S/FX3U, and it can substitute the FX-232AW module. The working power supply of this cable is directly from the USB port, but not the PLC programming interface.

Fx-Pcs-Win-E Software Download